Sound; Clock - Megasat Royal Line II 19 Mode D'emploi

7. The Main Menu

7.3 Sound

In this menu you can set up basic settings for
the TV sound. Use default settings or set your
own values.
Sound mode
Select a preset sound profile
120 Hz - 10 KHz Adjust the treble and bass.
Balance
Adjust the balance between right and left channel
Auto. volume
Set to ON to automatically adjust the volume during a quiet channels
Surround Sound Enable surround sound if you have connected the TV to an external
surround system.
SPDIF Mode
Activate the digital audio output.
AD switch
This option is for visually impaired persons. When activated, scenes
without sound are described by a speaker.
(Depending on the transmitter or transmission)
Hearing imp.
This option is only enabled if the AD selection has been turned on
and controls the speaker's volume.
Note:
The settings such as Treble, Bass, etc. can be edited only if you are in the sound
mode „Personal".
20
ENGLISH
7. The Main Menu

7.4 Clock

In this menu you can set the time of the TV
as well as various other automatic functions.
Clock
Set the current time and date.
Switch-off time Set the time when the TV should turn off automatically.
Switch-on time Set the time when the TV should turn on automatically. Use the
arrow keys to select when it should be: once, daily, Mon-Fri,
Mon-Sat, Sat-Sun, Sunday
Sleep timer
Set the minutes when the TV should turn off automatically. Choose
between Off, 10, 20, 30, 60, 90, 120, 180 or 240 minutes. You can
also access this function via the SLEEP button on the remote control
(press the SLEEP button repeatedly to switch between times).
Auto standby
Adjust the hours after the TV should switch off automatic table
when no operation on the unit or on the remote control is carried
out. Select between OFF, 3, 4 or 5 hours.
Time zone
Select the time zone you are in.
OSD timer
Adjust in seconds how long you want to displayed the on-screen
menu. Select between OFF or 10-60 seconds.
ENGLISH
21