Basic Functions; Learning Feature Remote Control; Select Input Source; Navigation In The Main Menu - Megasat Royal Line 32 Mode D'emploi

6. Basic Functions

6.1 Learning feature remote control

1. Press and hold the LEARN button on the remote.
2. Now press additionally the button you want to reprogram.
3. Press the button on the remote that you want to assign to this key.
4. If necessary, repeat these steps with the other LEARNING keys.

6.2 Select input source

Press the INPUT button on the remote control to select the input
source. Use the
p
a source. Press OK to confirm, or wait a few seconds.
Note:
Before you select the source, make sure that the source is rea-
dy, otherwise no signal is transmitted.
6.3 Navigation in Main Menu
Press the MENU button to enter the main
menu. It consists of further submenus:
• Tuning
• Image
• Sound
• Clock
• Setup
• Protection
Navigate with the arrow keys to scroll through the menu. Press the OK button to enter
the submenu. Press MENU to go one step back, or press EXIT button to exit completely.
10
/ buttons or the buttons on the TV to select
q
ENGLISH