SOUNDMASTER DAB950 Manuel D'utilisation page 25

To manually tune
Select "MENU > Manual tune". Then use the
to display a particular channel/frequency. Then press the
the RC to tune that channel/frequency. The display shows a live
indication of the received signal strength displayed.
Note: The slightly larger rectangle indicates the audio quality threshold - if the signal strength,
as indicated by the solid rectangles, falls below this threshold the audio quality will deteriorate.
At the same time the unit scans for any DAB stations on the selected frequency and updates the
station list with any new stations found. To listen to any stations found, return to the "Now
playing" screen and select the required station from the station list as normal.
5. Now playing information
While a station is playing, the screen shows its name and DLS
(Dynamic Label Segment) information such as program name, track
title and contact details. If DLS info is over 16 characters, info will
scroll.
To view further information
Press the "INFO" button.
Each time you press the "INFO" button the next set of information
is displayed, cycling through: DLS text, DL Plus information (this is
only displayed if broadcast by the station), signal strength, program type, ensemble name,
channel numbers/frequency, signal error rate, bit rate, codec/DAB variant, time and date.
Note: DL Plus presents additional information that can be broadcast by stations and stored
temporarily on your radio.
6. Other settings
Dynamic range compression (DRC)
This function reduces the difference between the loudest and
quietest audio being broadcast. Effectively, this makes quiet
sounds comparatively louder and loud sounds comparatively
quieter.
Note: DRC only works if it is enabled by the broadcaster for a
specific station.
To change the DRC setting
Select "MENU > DRC". The options available are: DRC off / low / high
DAB950 / English Instruction Manual
button on the RC
button on
9