Orbegozo SF 3344 Manuel D'instructions page 8

SF 3344
STRUCTURE
1. Front grille
2. Fan blade screw
3. Fan blade
4. Grille screw
5. Rear grille
6. Fan spindle
7. Rotating head
8. Joint
9. Body
10. Fixing
11. External joint
12. Support tube
13. Base
ASSEMBLY INSTRUCTIONS
1. Mount the support tube onto the base and insert the
decorative cover.
2. Insert the rotating head into the extendable tube and
screw firmly onto the support.
3. Mount the grilles and blades following the instructions below.
MOUNTING THE GRILLE & BLADE
1. Mount the rear grille (5) securely onto the motor by firmly screwing on the screw (4).
2. Insert the blade (3) into the motor spindle (6) using the central screw (2), making sure that the blade
spindle is facing to the front.
3. Check that the fan blade rotates freely without any contact with the grille.
4. The assembly of the front grille must correspond to the rear one and be firmly screwed into place.
OPERATING INSTRUCTIONS
- ADJUSTING DIRECTION OF AIRFLOW: You may adjust the angle, upwards or downwards, from the motor
casing.
- ADJUSTING OSCILLATION: For oscillation or stopping, firmly pull or push the screw above the motor casing.
- ADJUSTING SPEED OF AIRFLOW & TYPE OF AIRFLOW: Press the Airflow Speed Button to adjust the speed.
0 – OFF
1 – Low
2 – Medium
3 – High
- TIMER: Two hours.
CARE, CLEANING & STORAGE
• The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan, then
reserve the assembly procedure to remove those parts from the motor assembly before cleaning. Wipe
with a damp cloth then towel dry.
• Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth, then
immediately towel dry.
• Always store the fan in a cool dry location.
8