Visual Verification; Modes Of Operation; Standby Mode; Table 5.3-1: Icons And Descriptions - Enconnex AC6000 Mode D'emploi

5.3

Visual Verification

Check for display illumination and fan activity with no abnormal sounds.
Upon successful power-up, the display will indicate no faults or alerts. The default display
icons and their meanings are listed below. See alerts for more information.
NOTE: The unit will be in ​ S tandby Mode​ . The output connector will have no voltage present
unless auto-power on is configured for the unit and the unit is recovering for a power failure.
Icon
Backlight
5.4

Modes of operation

The AC6000 will be in one of several operating modes depending on power status and user
input.
5.4.1

Standby Mode

This mode is the "Power Off" mode. the unit will transition to this mode if there is a fault, or if the user
turns the unit OFF.
Indicator Description
Enconnex Appears once the MCB is turned to the
Logo ON position.
Battery Status Battery Status animates when charging.
Otherwise, it indicates the battery charge
state.
System Mode A plug is shown when the unit has valid
input power to the system (voltage and
frequency in range)
UPS Mode The sine wave indicates that the unit is in
UPS mode
Power Icon Initialization: Blinking
Normal: Steady
Buzzer Icon The buzzer will sound if there is a fault.
When there is an X through the icon, the
buzzer will be silenced.
Backlight The backlight will turn on after a button
press, or when power is applied, and will
turn off after 5 min of inactivity.
Discharging This appears when the unit Discharge
Mode Mode has been activated.

Table 5.3-1: Icons and Descriptions

24