WIKA A2G-60 Mode D'emploi page 20

7. Dismounting, return and disposal
7.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of
EN
hazardous substances (acids, bases, solutions, etc.) and must therefore
be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the dismounted instrument can result in a
risk to persons, the environment and equipment.
▶
▶
When returning the instrument, use the original packaging or a suitable
transport packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the
packaging.
Place shock-absorbent material evenly on all sides of the transport
packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring
instrument.
Information on returns can be found under the heading
"Service" on our local website.
20
In case of hazardous substances, enclose the safety data
sheet for the corresponding measuring substance.
Clean the instrument, see chapter 6.2 "Cleaning".
WIKA operating instructions model A2G-60