Equipment; Initial Start-Up; Important Notes; Assembling The Shearing Plant - Heiniger ONE Traduction De La Notice Originale

2.4

Equipment

y Portable shearing plant
y Operating instructions
y Screwdriver
y Drip feed lubricator 100 ml
y Universal grease
Options
y Flexible drive, worm
y Flexible drive, pin
y Ferrule short
y Shearing handpiece, Icon, worm
y Shearing handpiece, Icon, pin
y Combs and cutters for the shearing handpiece
3

Initial start-up

3.1

Important notes

WARNING!
y The voltage specified on the maker's plate and that of the local
power supply must match. The plant may only be connected to
an AC power supply.
y It is a compulsory that the operator has read the safety regu-
lations.
y In the event that the plant is operated from a generator, the
mains supply voltage must not exceed that specified on the
maker's rating plate.
3.2

Assembling the shearing plant

Pay attention to sufficient fastening of the shearing plant.

3.2.1 Securing / suspending the shearing plant

The shearing plant can be suspended by means of a strong rope or
chain. The hole provided in the handle should be used to secure the plant
(Diag. 2, pos. c).
8
ONE Shearing Plant – Translation of the original instructions