Important Safety Instructions For Using Staplers - Hitachi N 5024A2 Manuel D'instructions Et De Sécurité

Masquer les pouces Voir aussi pour N 5024A2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS FOR USING STAPLERS

1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
2. NEVER USE OXYGEN OR OTHER BOTTLED GASES. EXPLOSION MAY OCCUR.
3. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.
4. KEEP FINGERS AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS TO AVOID
ACCIDENTAL FIRING.
Never carry the Stapler with finger on trigger since you could drive a fastener
unintentionally and injure yourself or someone else.
Always carry the Stapler by the handle only.
5. CHOICE OF TRIGGERING METHOD IS IMPORTANT.
Read and understand section titled "METHODS OF OPERATION." (pages 15 – 16)
SAFETY
READ ALL INSTRUCTIONS
When operating the Stapler, always wear safety glasses with side
shields, and make sure others in work area wear safety glasses, too.
Safety glasses must conform to the requirements of American National
Standards Institute, ANSI Z87.1 and provide protection against flying
particles both from the front and side.
The employer must enforce the use of safety glasses by the Stapler
operator and others in work area.
Never use oxygen, combustible gases or any other bottled gases as a
power source for the Stapler.
Use of the above gases is dangerous, as the Stapler will explode.
Use only clean, dry, regulated compressed air.
Always assume the Stapler contains fasteners.
Never point the Stapler at yourself toward yourself or others, whether
it contains fasteners or not.
If fasteners are mistakenly driven, it can lead to severe injuries.
Never engage in horseplay with the Stapler.
Respect the Stapler as a working implement.
DANGER
WARNING
— 5 —
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

N 5021a

Table des Matières