Burner Locations - Whirlpool WCG Serie Manuel D'instructions

Burner Models for Kit W10676662
Model No. Left Left
Front Rear
KCGS550E 89 66
Black White
KCGS556E 89 66
Black white
KCGS950ES 89 66
Black White
KCGS956ES 97 66
Orange White

Burner locations

B
A
A. Left front
B. Left rear
C. Center
6. Remove all burner caps and burner bases (see the User
Guide for burner reference).
To remove the burner base for the Dual Flame and Dual Tier
Ultra Torch burners use a Torx
A
B
C
D
Dual Tier Ultra Burner
A. Inner burner cap
B. Outer burner cap
C. Gas tube opening
D. Burner base
Center Center Right Right
Inner Outer Rear Front
Inner
45 97 70 89
Blue Brown Green Black
45 101 70 89
Blue Yellow Green Black
45 97 70 40
Blue Brown Green Pink
45 105 70 40
Blue Red Green Pink
C D
D. Right rear
E. Right front
® T10 driver to remove the screw.
A
B
C
Standard and Dual Flame
A. Burner cap
B. Igniter electrode
C. Burner base
D. Gas tube opening
Right
Front
Outer
N/A
N/A
80
Pink
80
Pink
7. To Convert Standard Burner:
■ Use 7.0 mm wrench to loosen and remove the orifice
spud (A).
■ Set gas orifice spud aside.
E
■ Replace with correct LP gas orifice spud. See LP gas
orifice spud charts.
8. To Convert Dual Tier Ultra and Dual Flame Burners:
■ Use 7.0 mm wrench to loosen and remove the inner
orifice spud (A) and the outer orifice spud (B).
■
Set gas orifice spuds aside.
■ Replace with correct LP gas orifice spuds. See the LP gas
D
orifice spud charts.
A
B
Dual Tier Ultra Burner
A. Inner orifice spud
B. Outer orifice spud
A
B
C
D
E
Torch Burner
A. Inner burner cap
B. Inner burner base
C. Outer burner base
D. Burner support
E. Gas tube opening
A
A. Orifice spud
B
Dual Flame Burners
A. Inner orifice spud
B. Outer orifice spud
A
5