Standard Accessories; Knee Lifter - Janome HD9 Livret D'instructions

Standard Accessories

Bobbin
Large screwdriver
Small screwdriver
Accessory box

Knee Lifter

The knee lifter is extremely helpful when sewing patchwork,
quilting etc, since it allows you to handle the fabric while
your knee controls the presser foot.
Attaching the knee lifter
Match the ribs on the knee lifter with the notches in the
knee lifter socket and insert the knee lifter.
q Knee lifter
w Knee lifter socket
Adjusting the knee lifter
Loosen the setscrew and slide the angle bar in or out to
adjust the angle of the knee lifter.
Tighten the setscrew to secure the angle bar.
e Setscrew
r Angle bar
Using the knee lifter
Push the knee lifter with your knee to easily move the
presser foot up and down.
You can control how high the foot rises by the amount of
knee pressure you exert.
NOTE:
Do not touch the knee lifter while stitching, otherwise the
fabric will not be fed smoothly.
Lint brush
Hemmer foot
Oil
Spool cap
Cloth guide
Knee lifter
6
Net
Spool holder
HL x 5 –14 ... 5
Needles
Instruction book
w
q
e
r