Using Further Nozzles (Accessories) - Dirt Devil M7000 Mode D'emploi

2 Unpacking and assembling
2.3 Using further nozzles
(accessories)
26
Besides the floor nozzle you just attached, you may extend
the functions of your vacuum cleaner with other nozzles.
„
The combi brush and the crevice nozzle are included
in the package as accessories. You can store them in the
accessory compartment when not in use (Fig. 5).
- Combi brush (Fig. 6/1)
Use this to remove dust from objects with delicate
surfaces (e.g. cupboards and tables)
- Crevice nozzle (Fig. 6/2)
Use this to to suck dust out of hard to reach places.
Fig.5
„
Optionally available are:
- Turbo brush (Fig. 7)
This is equipped with a rotating brush head and is
thus ideally suited for the thoroughly deep cleaning of
carpets. The brushing also raises the carpet pile.
NOTE:
The high speed of the rotating brush causes a loud noise
during operation.
Fig.6
- Parquet brush (Fig. 8)
This has long bristles making it especially suitable for
cleaning delicate surfaces (e.g. parquet and laminate
floors)
WARNING:
Only attach nozzles when the vacuum cleaner is not
connectedto the mains. The appliance could be switched
on by accident.
Fig.7
This is how you attach the nozzles:
1. Switch off the vacuum cleaner and pull the plug from the
mains socket.
2. Pull the attached nozzle off of the telescopic tube.
3. Attach the required nozzle to the bottom end of the
telescopic tube (Fig. 9/1) or if necessary directly to the
handle.
Fig.8
ATTENTION:
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4. If possible, store nozzles no longer in use on the
accessory bracket.
Fig.9