Polygroup SUMMER WAVES RX600-NF Manuel Utilisateur page 15

OWNER'S MANUAL
1. Unplug the Power Filter Pump. Remove the Flow Diverter 3 ,Suction Fitting Screen 2 and Suction Fitting Base 1 from the Return Fitting and Suction Fitting
and flow plug with Plug 4 .
2. Todepressurize the Filter Pump system, vent the filter pump by twisting the Vent Screw 8 counter-clockwise.
3. Loosen the Hose Clamps 6 at the filter pump inlet and outlet. Detach both Hoses 5 from the filter pump.
4. Turn the filter pump up-side-down. The Base 11 is now locked by a latch pin. Torelease the lock, push the latch pin down and then turn left. Detach the Base
11 from the Canister by turning counter-clockwise.
5. Remove the Base fromthe Canister 15. 6. Remove the Motor Assembly 15 from the Canister 13 . Be careful not
tolosetherubberNozzle 14.
15