Air Filter; Removing And Fitting Air Filter - Beta Motorcycles ALP 200 2020 Manuel

4
2
1
EN
4
1

AIR FILTER

Check after every ride.
3
REMOVING AND FITTING AIR
FILTER
Remove the saddle, the tank cover and the
under-saddle plastic shield, as described
in "Body disassembly and reassembly" on
page 62.
• Remove the cover 2 by loosening the
screw 3.
• Lift the battery holder, as shown in the
figure.
• Release the filter holder 4.
• Remove the filter unit 1.
WARNING:
After every intervention, check that
nothing has been left inside the filter
box.
Reassemble following the dismantling
sequence in inverse order.
4
WARNING:
Never use the vehicle if the air filter
is not in place. The infiltration of dust
and dirt can cause damage and
considerable wear.
40