Gemini MDJ-1000 Mode D'emploi page 11

p l a y b a c K c o n t r o l s
b e a t s y n c
When SYNC is turned on the BPM of the tracks played
on this unit can automatically be synced with the player
connected by LINK that is set as the sync master.
SETTI N G TH E SYNC MAST ER
Press shift and search
set as the sync master. When the beat sync function
is on, the BPM display on the DJ player set as the sync
master changes to blue.
ENAB L ING SYN C MO DE
Press shift and search
playing track are synchronized to the sync master. The
BPM display changes to red when SYNC is engaged. The
TEMPO display changes to the original BPM of the play-
ing track.
C HANGIN G THE SY NC MAST E R
To change the player set as sync master, press shift and
search (4) on the player you want to disable as the
sync master. Press shift and search
you want to set as the sync master.
J o g w h e e l c o n t r o l s
JOGWHE EL ADJUST
The JOG ADJUST (7) rotary allows adjustment to the
feel of the jogwheel. For a stiffer and heavier feel, rotate
the JOG ADJUST (7) rotary to the left. For a looser and
lighter feel, rotate the JOG ADJUST (7) rotary to the
right.
VINY L MOD E
Pressing the VINYL (21) button enables VINYL mode and
illuminates the Vinyl indicator on the joghwheel display.
Enabling VINYL mode allows scratch-like effects when
the JOGWHEEL (27) is depressed and rotated. When
VINYL mode is disabled, the JOGWHEEL (27) will be
in SEARCH MODE and will allow searching through the
track.
START TIM E / STOP T IME
Adjusting the START TIME (18) jog mode adjustment
adjusts the speed at which playback returns to normal
when the top of the jogwheel is released and when the
unit resumes playback from pause mode. The start time
increases when turned clockwise and decreases when
turned counterclockwise.
The STOP TIME (19) jog mode adjustment adjusts the
speed at which playback slows when the top of the jog-
wheel is touched and when pause is enabled. The stop
time increases when turned clockwise and decreases
when turned counterclockwise.
-
m d j 1 0 0 0 m a n u a l • g e m i n s o u n d
(4) on the player you want to
(4). The BPM on the currently
(4) on the player
.
c o m
m i d i c o n t r o l s
M ID I MO DE
The MDJ-1000 has MIDI mode, which allows the data
from the buttons and dials of the MDJ-1000 to be
encoded into MIDI format. If the unit is connected via
a USB cable to a computer with MIDI-compatible DJ
software, the DJ software can be operated from the unit.
The computer audio can also be played from the MDJ-
1000's outputs.
It may not be possible to use some buttons to operate
the DJ sofware. For a list of MIDI messages refer the the
MIDI Device Messages Table.
NOTE
For instructions for your specific DJ software's
settings refer to your DJ software's operating manual.
HID MOD E
In addition to MIDI, the MDJ-1000 also uses HID protocol
which allows greater speeds.
If your software supports HID devices, disable MIDI de-
vices in your software, and search for HID devices. This
should locate the MDJ-1000 and allow you to use it as a
HID device.
CON FI GU RI N G MI DI MOD E
Connect the USB cable from the unit's rear USB port (D)
to the computer. Press the MIDI source selection on the
MDJ-1000 (20). This will terminate playback of the CD/
USB/SD sources.
The MDJ-1000 will then display an audio configuration
prompt for audio bit rate and sampling rate on the touch
screen with the following audio settings:
• 24-bit/192kHz
• 24-bit/96 kHz
• 24-bit/48 kHz
• 16-bit/44.1 kHzv
Press and hold the MIDI source select button to swtich
between audio settings. Press MIDI to toggle between
audio settings and press the ENCODER (14) to apply the
setting. Press BACK (15) to exit.
NOTE
Higher bit depth and sampling rates will create
greater latency and may impact performance.
After configuring the audio settings on the MDJ-1000,
start the DJ software:
• Select the MDJ-1000 as your MIDI device*
• Select the MDJ-1000 as your AUDIO device*
*Refer to DJ software's instructions
11