Operation - Ego Power+ HT2400 Guide D'utilisation

Blade Guard
The blade guard keeps the operator from coming in contact with the sharp blades
when the tool is not in use. It also helps keep the blades from being nicked or
damaged when the tool is in storage.
Battery-Release Button
Press to release the battery pack from the tool.
Latch
Locks the battery pack in place when installed on the tool.
Ejection Mechanism
Aids in removing the battery.
Mounting Slot
Guides the battery pack.

OPERATION

WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being
thrown into your eyes and other possibly serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATION
You may use this product for the purposes listed below:
 Trimming and the forming of hedges, shrubs, and bushes with a branch diameter
of less than 3/4" (19mm)
Do not allow familiarity with this product to make you careless.
Always wear eye protection with side shields marked to comply with
Do not use any attachments or accessories not recommended by the
56V LITHIUM-ION CORDLESS HEDGE TRIMMER
15