Table des Matières
Publicité
5.
Repeat this around the head to create as many curls as desired.
6.
After styling each section, the StyleAdapt™ indicator will spin (fig. B) indicating that your styler is
learning about your hair and adjusting the barrel temperature to a heat that is personalised to you.
The temperature changes are not shown on the display but happen quickly and automatically during
styling.
•
NOTE: If the indicator spins when your styler is not in use this just means that StyleAdapt™ Mode is on.
•
If you are sharing your styler select StyleAdapt™ mode 2. This ensures that when the styler is used by
someone else, it doesn't change what it has learned about your hair. To select, press the K button
until StyleAdapt 2 is shown on the display.
Manual Mode
1.
To override the StyleAdapt™ mode and use as a standard styler, press the K button several times until
the display shows the temperture (e.g. 160ºC) and the StyleAdapt™ indicator goes off. Note that in
manual mode, your styler will no longer be learning about your hair and adapting the heat.
2.
Select the appropriate temperature for your hair type using the "+" and "-" temperature controls on
the side of the product. Start styling on lower temperatures first.
3.
The "+" button will increase the temperature and the "-" button will decrease the temperature.
Recommended Temperatures
Temperature
130°C - 160°C
170°C - 200°C
200°C - 210°C
Caution: the hottest temperatures should only be used by experienced stylers.
4.
Working on one section at a time, hold the handle with the cool tip facing down and wrap a section of
hair around the barrel.
5.
Wait about 10-20 seconds for the curl to form.
6.
Unwind the hair and release the curl.
7.
Repeat this around the head to create as many curls as desired.
8.
To re-activate StyleAdapt™ mode press the K button until StyleAdapt 1 is shown on the display and
the StyleAdapt™ indicator is illuminated. Your styler will now be learning about your hair and
adapting the heat again.
9.
After use, press and hold the off button for two seconds to turn off then unplug the appliance.
Temperature Lock Function
Set the desired temperature using the + and - buttons then lock the settings by pressing the "-"
•
button for 2 seconds. The B symbol will appear on the temperature display.
•
To unlock the temperature setting, press and hold the "-" button for 2 seconds.
Memory Function
•
Each time you use your styler it will automatically set itself to the last setting used.
Hair type
Thin / fine, damaged or bleached hair
Normal, healthy hair
Thick and difficult to style hair
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
5
Publicité
Table des Matières
