Maintenance Schedule; Maintenance - Husqvarna K 770 Dry Cut Manuel D'utilisation

To remove dust from the dust bag
Note:
Applicable only for dust bags that can be used
again.
WARNING:
gloves and approved respiratory protection.
Do not open the dust bag unless it is in a
garbage bag. Dust can spill into the air when
the operator removes and cleans the dust
bag. Dust can spill out in the air when the
operator removes and cleans the dust bag.
1. Put the dust bag in a garbage bag.
!
2. Open the zipper of the dust bag.

Maintenance schedule

The maintenance schedule shows the neccessary
maintenance of the product. The intervals are calculated
on daily use of the product.
Daily
Clean External cleaning
Cold air intake
Replace
Function inspec- General inspection
tion
Throttle lockout*
Stop switch*
Blade guard, blade guard
extender and dust shiled*
Cutting blade*
Dust equipment**
58
Put on protective glasses,

Maintenance

Weekly
Vibration damping sys-
tem*
Muffler*
Drive belt
Carburetor
Starter housing
3. Put the dust bag fully into the garbage bag.
4. Hold and shake the dust bag until it is empty.
5. If necessary, wash the empty dust bag according to
local regulations.
To discard the dust bag
Note:
Applicable only for dust bags that are discarded
when they are full.
1. Use the ropes at the inlet to seal the dust bag.
2. Discard the dust bag. Refer to local regulations.
Monthly
Spark plug
Fuel tank
Fuel system
Air filter
Clutch
Yearly
Fuel filter
861 - 005 - 22.04.2022