Protector AS-7000 Série Mode D'emploi page 39

Status Heater-Transmitter
1x flash slowly GN
Heater off
After correct feedback
2x rapidly flashes
(3 min. test interval)
1x flash slowly RD
Heater on
After correct feedback
2x rapidly flashes
(3 min. test interval)
–
Blinds
open
–
Blinds
closed
All –
–
Battery
warning
Battery
–
empty
Window-Transmitter Jalousie-Transmitter
– –
– –
– 1x flash slowly GN
After correct feedback
2x rapidly flashes
– 1x flash slowly RD
After correct feedback
2x rapidly flashes
3x flash rapidly. –
New communication
attempt.
Central not reached,
after 3 attempts
stopping communication
– –
– –
Central (acoustics) Central (LED)
– LED heater
permanent GN
1x beep if LED heater
window closed permanent RD
– LED blinds
permanent GN
1x beep if LED blinds
blinds closed permanent RD
– –
– If heater on/window
open/blinds open GN
with flashing RD.
Otherwise flashing RD.
– POWER LED flash RD
Flashing Status LED
Heater/window/
blinds RD
EN
Central (relay)
Power circuit
closed
Power circuit open, if
window and
blinds closed
Power circuit
closed
Power circuit open, if
heater on
–
Relay according to
the state (please refer
window open/closed)
Power circuit
open
39