3.1.1 INSTALLING THE APPLIANCE BASE
NOTE: It is highly recommended to have another person assist in the installation.
A.
Using the four screws, install the rear base support to the base.
B.
Install the defl ector, using the two screws onto the front support.
C.
Slide the assembly on to the base.
D.
Place the appliance onto the assembled base. Ensure the appliance is placed securely on the clip.
E.
Place and slide the appliance from right to left onto the assembled base. Secure the appliance to
the base using the screws provided.
A
C
E
B
D
2
3
X3
1
X2 TABS
9
EN
W415-1513 / A / 12.14.15