Locating Appliance; Grounding Appliance; Unpacking And Testing Appliance - Napoleon NEFL42SH Instructions D'installation Et D'opération

6
2.2

UNPACKING AND TESTING APPLIANCE

Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance
EN
operates properly by plugging the power supply cord into a conveniently located 120-V, 15-A grounded outlet.

2.0 LOCATING APPLIANCE

DUE TO HIGH TEMPERATURES, THIS ELECTRIC APPLIANCE SHOULD BE LOCATED OUT OF
TRAFFIC. KEEP COMBUSTIBLE MATERIALS SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS,
CLOTHES AND CURTAINS AT LEAST 36IN FROM THE FRONT OF THE APPLIANCE.
NEVER LOCATE THIS ELECTRIC APPLIANCE WHERE IT MAY FALL INTO A BATHTUB OR OTHER
WEAR SAFETY GLOVES AND SAFETY GLASSES FOR PROTECTION DURING INSTALLATION AND
TO PREVENT CONTACT WITH SAGGING OR LOOSE INSULATION, THE ELECTRIC APPLIANCE
MUST NOT BE INSTALLED AGAINST VAPOR BARRIER OR EXPOSED INSULATION. LOCALIZED
DO NOT EXPOSE THE ELECTRIC APPLIANCE TO THE ELEMENTS (SUCH AS RAIN, ETC.).
2.1

GROUNDING APPLIANCE

This appliance is for use on 120 volts. The cord has a plug
as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot
To disconnect appliance, turn controls to off, then remove
receptacles. The green grounding lug extending from the
plug from outlet.
adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove
plug from outlet.
W415-1513 / A / 12.14.15
!
WATER CONTAINER.
MAINTENANCE.
OVERHEATING COULD OCCUR AND A FIRE COULD RESULT.
WARNING
GROUNDING METHODS
(A)
GROUNDING PIN
METAL SCREW
COVER OF
(B)
GROUNDED
OUTLET BOX
96.1