Approval And Certification - RIDGID RT-3 Manuel D'utilisation

RT-3, RT-5x, RT-7x and RT-9x Thermal Imagers
the cost of recycling the lithium-ion battery packs
once they have reached the end of their useful life.
RBRC™, RIDGID ® , and other battery suppliers
have developed programs in the USA and Canada
to collect and recycle rechargeable batteries.
Normal and rechargeable batteries contain ma-
terials that should not be directly disposed of in
nature, and contain valuable materials that can
be recycled. Help to protect the environment and
conserve natural resources by returning your
used batteries to your local retailer or an author-
ized RIDGID service center for recycling. Your
local recycling center can also provide you with
additional drop off locations.
RBRC™ is a registered trademark of the Re -
chargeable Battery Recycling Corporation.
For EC countries: Defective or used battery
packs/batteries must be recycled according to
the guideline 2006/66/EC.

Approval And Certification

Ridge Tool Company (RIDGID)
RT-3
Product
RT-5x
RT-7x
RT-9x
57533
57528
Mat.-No.
57523
57518
Date 17.05.2017
The use of the wireless module is subject to the regulations and
stipulations of the respective country of use, and the module may
only be used in countries for which a country certification has
been granted. The user and every owner has the obligation to ad-
here to these regulations and prerequisites for use, and acknowl-
edges that the re-sale, export, import etc. in particular in countries without
wireless permits, is his responsibility.
Country Comments
Canada Contains IC: 5969A-TIW101
IC: 22560-2017RTFAM
IC Warnings
USA Contains FCC ID: TFB-TIW1-01
FCC ID: 2AECA-2017RTFAM
FCC Warnings
IC Warnings
Wi-Fi / Feature
Bluetooth ®
Wi-Fi range
Information radio type
radio class
radio module
company
RF Band
power output
[E.I.R.P]
18
Values
typical 15 m
TiWi-BLE
WLAN 2.4 GHz IEEE 802.11 b/g
LSR
W66 N220 Commerce Court
Cedarburg,
WI 53012-2636 USA
WLAN: 2412 – 2480MHz
WLAN: 20dBm
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
Caution: Radio Frequency Radiation Exposure.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment and meets the IC radio fre-
quency (RF) Exposure Guidelines. This equipment should be in-
stalled and operated keeping the radiator at least 12 cm or more
away from person's body in normal use position.
Co-Location:
This transmitter must not be co-located or operated in conjunc-
tion with any other antenna or transmitter.
FCC Warnings:
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to
ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular install -
ation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to op-
erate the equipment. Shielded interface cable must be used in
order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines. This equipment should be
installed and operated keeping the radiator at least 12 cm or more
away from person´s body in normal use position.
Co-Location:
This transmitter must not be co-located or operated in conjunc-
tion with any other antenna or transmitter.
999-995-119.10_REV. A