Black & Decker HHS315J Mode D'emploi page 6

English
EMPTYING AND CLEANING THE PRODUCT

WARNING:
emptying the dust bin or cleaning.
Removing the dust bin and filter
(Fig. G–J)
1. Press the dust bin release button
dust bin from the power head as shown in Fig. G.
4
2. While holding the dust bin
out the filter 11 .
3. Shake the dust bin 4
contents as shown in Fig. I.
4. To replace the filter, push it back onto the bin unit until
it locks firmly into position.
WARNING:

without the filter installed.
5. Optimum dust collection will only be achieved with a
clean filter.
6. The dust bins and filter can be washed in warm soapy
water as shown in Fig. J.
7. Make sure that the filter and the dust bin are dry
before reinstalling.
Fig. G
3
Fig. H
11
Fig. I
4
Turn vacuum off before
3 and remove the
4 over a garbage can, pull
over a garbage can to empty the
Never use the appliance
Fig. J
11
Storage - Fig. K
Your BLACK+DECKER HHS315J can be stored upright, on
a level surface, by pushing the unit forward into the floor
head until it clicks into place, as shown in Fig. K. It can also
be hung from a wall fitting (not supplied) by using the hole
in the handle.
Fig. K
4
MAINTENANCE
Use only mild soap and damp cloth to clean the vacuum.
Never let any liquid get inside the vacuum; never immerse
any part of the vacuum into a liquid.

WARNING:
completely dry before using it.
Make sure the vacuum is