Outdoor Sensor; Troubleshooting - OWIM IAN 311249 Instructions D'utilisation Et Consignes De Sécurité

Outdoor sensor:

Replace the batteries if battery display
Remove the battery compartment cover from the back of the outdoor sensor.
Remove the used batteries.
Insert 2 new batteries type AA, 1.5 V.
Note: Make sure you insert the batteries with the correct polarity. The correct
polarity is shown inside the battery compartment
Close the battery compartment.

Troubleshooting

Note: This product has delicate electronic components. This means that if it is
placed near an object that transmits radio signals, it could cause interference.
If the display indicates a problem, move such objects away from the weather
station or outdoor sensor or remove the batteries from the weather station or
outdoor sensor for a short while and then replace them or press the RESET
button back of the weather station.
41
Obstacles such as concrete walls can also cause that the reception is disturbed. In
this case, change the location (eg near a window). Please take note that the exter-
nal sensor should always be set up within max. 30 meters (open space) from the
is shown.
26
.
50
GB/IE/NI 37