Switching Off The Alarm Signal; Snooze Function; Preparing To Use The Weather Forecasting Function - OWIM IAN 311249 Instructions D'utilisation Et Consignes De Sécurité

3. Press the button + again. The ALARM 1 or ALARM 2 symbol in the LC display
goes out. The alarm has been deactivated.

Switching off the alarm signal

Press any button except the SNOOZE- / LIGHT button
signal. It is not necessary to reactivate the alarm. It switches itself automatically
to the alarm time which has already been set.
Note: The alarm signal sounds for approx. 2 minutes.

SNOOZE function

Press the SNOOZE- / LIGHT button
SNOOZE mode. The alarm signal sounds again after approx. 5 minutes.

Preparing to use the weather forecasting function

Note: Please take the weather forecast from your local weather forecasting service
into account as well as the forecast from your weather station. If there are discrepancies
between the information from your product and from the local weather forecasting
service, please take the advice of the latter as authoritative.
22 GB/IE/NI
33
as the alarm signal sounds to get to
33
to stop the alarm