Operation; Receiving The Dcf Radio Time Signal - OWIM IAN 311249 Instructions D'utilisation Et Consignes De Sécurité

Reception can be considerably impaired by obstacles (e.g. concrete walls) or sources
of interference (e.g. other electrical devices). In the event of reception problems,
change the position of the weather station (e.g. to somewhere near a window).

Operation

Receiving the DCF radio time signal

After a connection with the outdoor sensor is established or 3 minutes after the battery
safety strip is removed, the weather station automatically begins to search for the
DCF radio signal. The search is shown in the LC display by the radio tower symbol
flashing.
Note: In buildings made of reinforced concrete the reception of the radio signal
may be severely impaired (see "Setting up the devices").
In order to correct any deviations from the exact time, the clock is automatically
synchronised with the DCF radio signal every day at 1:00, 2:00 and 3:00.
Reception of the DCF radio signal can also be started manually on the weather station.
Press the + and – button
to receive the DCF radio signal. This process takes several minutes and is indi-
cated in the LC display by a flashing radio tower symbol.
If the connection with the DCF radio signal cannot be established, the search is stopped.
, at the same time. The weather station attempts
35 36
5
GB/IE/NI 17