JANE Koos iSize Mode D'emploi page 38

EN
38
EN
38
Your new KOOS iSIZE by Jané is a safety seat designed to protect your
baby in the car. This product is suitable for children of up to 13 kg, and with
a height of between 40 and 83cm.
This is an enhanced "i-SIZE" child restraint system. It has been approved
under Regulation ECE 129/00 for use on "i-SIZE compatible" vehicle seats
indicated in the instruction manual from the vehicle manufacturer for use
with the platform.
This enhanced child restraint system is also compatible with the ISOfix
category D (see compatibility list on the web page: www.jane.es)
Your KOOS iSIZE safety seat has also been approved for use without the
platform, just using the vehicle seat belts.
You can also use your KOOS iSIZE with any Jané chassis fitted with the Pro-
fix system, provided that the chassis instructions indicate this is possible.
If in doubt, consult the distributor of your enhanced child restraint system,
or see the web page www.jane.es
It is very important that you read these instructions carefully before using
the KOOS iSIZE safety seat for the first time. Make sure that everyone who
is going to use it at any time is also familiar with the instructions for correct
installation and use. It has been shown that a significant percentage of
safety seat users do not install their seats correctly.
Understanding and following the instruction manual correctly is as
important for safety as the actual seat itself.
Keep the instructions in the space found on the rear part of the seat, and
consult them if you have any doubts. You can also find the instructions on
our web page: you will also find a QR code on the seat.