Operation - Renkforce A-1200 Mode D'emploi

c) Operation
Always pull the mains plug before filling the fog machine.
Never fill the machine with flammable liquids or add flammable liquids to the fog liquid. Only
use suitable water-based fog liquids (the CONRAD product range offers suitable fog liquids, see
„Specifications").
Never tilt the fog machine. Fog liquid might escape or get inside the device and cause damage
or injure the operator.
Make sure that no liquid enters the interior of the device when filling it with fog liquid. This can
lead to damage to the device and can cause deadly electric shocks.
• Make sure that the mains plug is not plugged in.
• Unscrew the tank cover from the device and fill fog liquid into the tank.
• Screw the tank cover firmly back into place.
• Plug the connection plug of the remote control into the corresponding socket on the back of the fog
machine.
• Insert the mains plug into an earthed mains socket.
• Switch on the device using the power switch. When the device is switched on, the power switch is lit and
the fog machine heats up.
• The heat-up process takes about 3-4 minutes.
• When the device has reached operating temperature, the two indicators on the remote control light up
and the device is ready to produce fog.
• Press the fog button on the remote control to manually trigger the fog function.
• Make sure that the tank never runs empty during operation. If it does run empty, immediately switch off
the fog machine via the power switch and allow it to cool down.
• Refill the tank when the device has cooled down.
• If no fog is produced, the device is still heating up or reheating (the indicators on the remote control are
not lit).
• When the device is switched off, a small amount of fog might still come out of it. This is normal and does
not indicate a defect.
• If you no longer require the device, disconnect the mains plug and allow the device to cool down.
• Empty the tank if you are not using the device for a longer period of time. This prevents fog liquid from
escaping during transport or storage.
21