Makita DMP180 Manuel D'instructions page 10

When inflating a floating tube, the
NOTICE:
pressure gauge will not display an accurate value
since the pressure of floating tube is less than 20
kPa (3 PSI). When inflating a floating tube, do not
use the value on the pressure gauge, but inflate it
by checking the status of the floating tube.
6. Keep pulling the switch trigger until the tool stops.
The item is inflated with the specified pressure.
MAINTENANCE
Always be sure that the tool is
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
Never use gasoline, benzine, thinner,
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
10 ENGLISH