Charging The Battery - ACME zoopa Q155 roonin Manuel D'utilisation

First steps and information
Carefully read this manual.
The zoopa Q155 roonin is a RTF (Ready-to-Fly) model.
You additionally require 6pcs. AA Batteries for the activation. Please insert these under attention of the
correct polarity (check marks on the inside of the controller) and then close the controller with the
cover of the battery case.
ATTENTION : Only use standard batteries (non-rechargeable). Make sure that these are inserted
correctly (+/-) !
ACME the game company GmbH assumes no liability for privacy violations, personal injury and
damage to private property caused by the user of the model.
Please follow carefully the instructions in this guide step by step, to ensure proper handling.

Charging the battery

The LiPo battery will be charged through the supplied USB- Charger.
Connect the battery with the charger and make sure that it is plugged correctly.
Now connect it to an USB source, for example your computer.
You can alternately use an USB power adaptor.
(Art. No. FCHD43).
Charging will be shown through the integrated LED. This process can take up to 70 minutes. As soon
as the battery is fully charged, the LED will shut off.
Only use the original battery, because other batteries may have a different polarity and can
damage your equipment!
www.acme-online.de
ACME the game company