Controllable Functions - LGB Ge 2/4 Serie Mode D'emploi

Masquer les pouces Voir aussi pour Ge 2/4 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Function Mapping DCC
It is possible to assign functions controlled from the decoder to function buttons
of your choice (mapping). To do this an appropriate value must be entered in the
appropriate CV.
The CVs (lines) and the functions (columns) are listed in the tables on pages 40/41.
Four CVs belong to each button. For space reasons the 4 CVs were put together in
one line starting with CV 282 (Button F5).
It is basically possible to assign several functions to one button or one function to
several buttons.
Note: The programming for function mapping should be done only by experienced
users.
Individual functions can be controlled by means of SUSI depending on the design of
the decoder. These functions can be handled by the decoder as sound. The volume
levels belonging to these functions cannot be changed.
Examples of Function Mapping:
AUX 2 is to be forwards and backwards on Function 3
CV 272 & CV 372 = 8
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
Sound 15 is to be shifted from forwards and backwards on Function 3 to Function 8.
The existing function at Function 8 is overwritten in the process.
CV 275 & CV 375 = 0
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
CV 297 & CV 397 = 0
CV 298 & CV 398 = 0
CV 299 & CV 399 = 0
CV 300 & CV 400 = 4

Controllable Functions

Lighting *
Sound effect: long whistle blast
Sound effect: Squealing brakes off
Sound effect: Short whistle blast
Sound effect: Station announcements
Sound effect: Conductor whistle
Sound effect: Operating sounds *
Sound on/off
ABV, off
Engineer's cab lighting
Rear headlights off
Front headlights off
Sound effect: Blower
Sound effect: Air pump
Warning signal (red)
* active in analog operation
Note:
At www.LGB.de you will find a tool you can use to calculate different decoder set-
tings as well an extensive description of the decoder and the settings. Programming
the decoder settings with the 55015 Universal Hand Controller is also explained in
these instructions.
12
LV + LH
1
Sound 1
2
BS
3
Sound 2
4
Sound 4
5
Sound 3
6
FS
7
8
Sound 13
9
10
AUX 5 + 6
11
AUX 1
12
AUX 2
13
Sound 9
14
Sound 11
15
AUX 3 + 4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

24450

Table des Matières