Product Specifications; Rules For Safe Operation - Makita GB602 Manuel D'instructions

ENGLISH (Original instructions)
Model
Wheels:
Diameter
Width
Arbor Hole
No load speed
(/min)
Overall length
Net Weight
............... Look for this symbol to point out important safety precautions.
It means attention!!
Safe operation of this power tool requires you read and
understand this operator's manual and all labels affixed to
the tool. Safety is a combination of common sense,
staying alert, and knowing how your bench grinder works.
READ ALL INSTRUCTIONS
■ KNOW YOUR POWER TOOL. Read the operator's
manual carefully. Learn the applications and limitations
as well as specific potential hazards related to this tool.
■ GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces. For
example: pipes, radiators, and refrigerator enclosures.
■ KEEP GUARDS IN PLACE and in working order.
Never operate the tool with any guard removed. Make
sure all guards are operating properly before each use.
■ REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see keys and adjusting
wrenches are removed from tool before turning it on.
■ KEEP THE WORK AREA CLEAN. Cluttered work
areas and workbenches invite accidents.
■ AVOID DANGEROUS ENVIRONMENTS. Do not use
power tools near gasoline or other flammable liquids, in
damp or wet locations or expose them to rain. Keep
work area well lighted.
■ KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses and be kept a safe distance
from work area.
■ MAKE WORKSHOP CHILD PROOF with padlocks,
master switches, or by removing starter keys.
■ DON'T FORCE THE TOOL. It will do the job better and
safer at the rate for which it was designed.
■ USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job for which it was not designed.
■ INSPECT EXTENSION CORDS PERIODICALLY and
replace if damaged.
2

PRODUCT SPECIFICATIONS

GB602
6 in. (150 mm)
5/8 in. (16 mm)
1/2 in. (12.7 mm)
3,550 (60Hz)
375 mm (14 - 49/64")
9.08 - 9.31 kg
(20.02 - 20.52 lbs)

RULES FOR SAFE OPERATION

GB602W
6 in. (150 mm) 6 in. (150 mm)
1/4 in. (6.4 mm) 5/8 in. (16 mm)
1/2 in. (12.7 mm) 1/2 in. (12.7 mm)
3,550 (60Hz)
375 mm (14 - 49/64")
8.93 - 9.27 kg
(19.69 - 20.44 lbs)
■ WEAR APPROPRIATE CLOTHING. Do not wear loose
clothing, neckties, or jewelry that can get caught in the
tool's moving parts and cause personal injury, Non-
solid footwear is recommended when working
outdoors. Wear protective hair covering to contain long
hair.
■ ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses are NOT safety
glasses.
■ PROTECT YOUR LUNGS. Wear a face or dust mask if
the cutting operation is dusty.
■ PROTECT YOUR HEARING. Wear hearing protection
during extended periods of operation.
■ DON'T ABUSE CORD. Never carry tool by the cord or
yank it to disconnect from receptacle. Keep cord away
from heat, oil, and sharp edges.
■ DO NOT OVERREACH. Keep proper footing and
balance at all times.
■ MAINTAIN TOOLS WITH CARE. Keep tools sharp and
clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
■ NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF.
■ AVOID ACCIDENTAL STARTING.
■ USE RECOMMENDED ACCESSORIES. The use of
improper accessories may cause risk of injury.
■ DO NOT use wheels with incorrect size bore. NEVER
use wheel washers or wheel that are defective or
incorrect and NEVER touch grinding wheel or other
moving parts.
■ NEVER STAND ON TOOL. Serious injury could occur
if the tool is tipped or if the wheel is unintentionally
contacted.
GB801
8 in. (205 mm)
3/4 in. (19 mm)
5/8 in. (15.88 mm)
3,550 (60Hz)
395 mm (15 - 9/16")
19.63 - 19.91 kg
(43.28 - 43.89 lbs)