Battery Replacement - DRAMINSKI GRAIN MASTER Mode D'emploi

2. Press "OK" button and choose the desired seed by using "∆ ∆ ∆ ∆ " and "∇ ∇ ∇ ∇ " buttons.
3. When the name of desired seed appears press "OK" button.
4. Now, by means of "∆ ∆ ∆ ∆ " and "∇ ∇ ∇ ∇ " buttons enter the desired value of correction. That
number will be used to raise or lower the readings. For example if you want to
raise the readout by 1.2%, "+1.2%" should be displayed.
5. When the required value is shown, press "OK" button. The sign "Are you
sure?" will be displayed to make final confirmation. Confirm the change by
pressing "OK" button again.
6. If no more modification is needed, turn off the instrument by using "ON/OFF"
button.
Any modified species will be displayed with a "*" on the right of the display.
It is possible to change the calibration back to data originally programmed by the
manufacturer by setting the calibration to 0,0%. Then the "*" by the name of chosen
seed will be removed

BATTERY REPLACEMENT

The device is equipped with automatic power supply charge level signaling. If the
battery is discharged, a message „battery low" is displayed.
The device is supplied with standard 9V alkaline battery.
To replace the battery, detach the cover at the bottom of the device, remove discharged
battery and insert a new battery checking the polarity.
After battery replacement, put on the battery cover.
6
Modification
OK./C
Rape
Rape
0.0 %
Rape
+1,2 %
Are you sure?
OK./C
Rape
[1]
.
*