DRAMINSKI GRAIN MASTER Mode D'emploi page 19

" " button
ON/OFF
- switching the device on and off (Caution! The device will automatically turn off after 3
minutes if no buttons are used.)
" " button
OK
- measurement cycle start
" " button
C
- readout of mean value from 3 last measurements and return to the name selection
from the species list
"t t t t ,u u u u " button
- selection of grain from the species list
DEVICE ACTIVATION
Before performing measurements it is necessary to check if the friction disk of
the measuring chamber and the friction disk of the cover are clean.
1. Turn on the power supply with „ON/OFF
a. Introductory message will appear for a moment on the display (the device name and
serial number), e.g.:
The number below "GRAIN MASTER" is the serial number of the device.
b. Name of last used grain species will automatically appear, e.g.:
WHAT ARE THE BUTTONS FOR?
pszenica zwycz.
14.6 %
GRAIN MASTER
1001
23.5°C
"
button.
3