4.
When you hear a click sound, that means the
installation is completed.
①
Slot
Guide
Filling water
1.
Open the water supply inlet cover from the
left side.
2.
Fill the water.
Caution!
•
Fill with water up to 2.5L (which is
suggested), and not above the level.
Otherwise, it may overflow when the lid is
close.
•
Other beverage(milk,juice,carbonated
beverage etc) is not suggested to be used
than potable water .Especially beverage
including grain must not be used (may result
in failure).
•
Hot water can not be filled into the water
tank directly.
Warning!
Don't touch other parts of the appliance when
filling water, it may cause the water leakage.
Dispensing water
1.
Make sure the cover of the water tank is
fitted on.
2.
Close the fridge door and check the
dispenser.
16
②
unlock
lock
Warning!
1. Be careful not to press on the head. 2. When
fitting the water tank, ensure the head inserted
into the hole first.
Before you dispense the water, make sure the
lock device is on left side, it is meaning unlock
situation.
Warning!
The lock is defined as "child lock". Don't push the
dispenser lever forward strongly, when the
dispenser is on right side, it is meaning lock
situation, it may damage the mechanism.
Receiving Water
You should use the correct cups to receive water
underneath the water dispenser.
Dispenser lever
Suggested position
Warning!
Don't push the dispenser lever forward without
cup, it may cause the water leak from the
dispenser.
Cleaning
3.
Put the water tank out of the door carefully,
and then wash the tank, lid, and head lightly
in water.
4.
After you have successfully cleaned the
appliance, you should dry it by natural drying
or using the dryer.
5.
If you have used the water dispenser for
many times, the water in the receiving tank
may drop on the floor, which may make your
floor wet, and you should clean the tank with
dry towel regularly before overflow.