Table des Matières
Publicité
FR
5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
ES
WARNING: Do not continue to use the sander with a sanding paper
PT
that is overworn or damaged.
WARNING: Do not use the same sanding paper for wood and metal.
IT
Metal particles become embedded in the sanding paper and will
EL
WARNING: Clean the air vents on your power tool regularly. The
motor's fan will draw the dust inside the housing and excessive
PL
accumulation of powdered metal may cause electrical hazards.
RU
Mounting the dust extraction box
KZ
WARNING! Always connect the dust extraction when sanding.
UA
We recommend the use of the dust extraction facility at all times. Simply slide the dust
RO
extraction box onto the dust extraction port. Always keep the dust extraction holes in the
sanding base free of obstructions.
EN
Folding handle
The handle can be changed to the desired angle when using the product.
1.
Loosen the adjustment knob to loosen the handle.
2.
Adjust the handle to the desired working position so that you can hold the product safely
during operation.
3.
Tighten the adjustment knob to tighten the handle.
174
scour a wooden surface.
Publicité
Table des Matières
