Technical Data; Before Putting The Equipment Into Operation - Dexter 350OS2.5 Manuel D'instructions

Table des Matières

4.TECHNICAL DATA

NOTE:

The declared vibration total value has been measured in accordance with a standard

test method and may be used for comparing one tool with another;

The declared vibration total value may also be used in a preliminary assessment of

exposure.

WARNING:

The vibration emission during actual use of the power tool can di er from the

declared total value depending on the ways in which the tool is used;

Identify safety measures to protect the operator that are based on an estimation of

exposure in the actual conditions of use (taking account of all parts of the operating

cycle such as the times when the tool is switched o and when it is running idle in

addition to the trigger time). Depending on the actual use of the product the

vibration values can di er from the declared total! Adopt proper measures to protect

yourself against vibration exposures! Take the whole work process including times

the product is running under no load or switched o into consideration! Proper

measures include among others regular maintenance and care of the product and

application tools, keeping hands warm, periodical breaks and proper planning of

work processes!

WARNING: The device should be disconnected from the mains before

putting into operation.

Mounting/changing the sandpaper

Always ensure that the machine is switched o and plug is removed from the power point

before making any adjustment.

1. Select the required grade of sanding paper.

2. Remove any dust or debris from the hook and loop of the base.

3. To attach hook & loop type sanding paper simply align the holes in the sanding paper

with the holes in the sanding base and press rmly into place.

4. To remove the sanding paper, peel it away from the base.

173

Table des Matières