Scene Select Settings; Preset Position Settings - Panasonic WV-CW974 Mode D'emploi

Scene Select Settings

Display the scene select setting menu from the setup
menu to configure scene select settings. First, display
the scene select setting menu.
1. Display the setup menu (page 24), move the cursor
to SCENE SELECT O, and then press the CAM
(SET) button.
This will display the scene select setting menu.
**SCENE SELECT**
SCENE
LOAD
RET TOP
Scene Select Settings
Use the following procedure to configure scene select
settings.
1. Move the cursor to SCENE, and then tilt the joystick
left or right to change the scene setup.
INDOOR (L) : Indoor setting (picture quality
INDOOR (H) : Indoor
OUTDOOR (L) : Outdoor
OUTDOOR (H) : Outdoor
Settings related to the picture switch depending on
the scene settings. Scene select settings and
relationship to other settings are shown in the table
below.
AGC
INDOOR (L) MID
INDOOR (H) HIGH
OUTDOOR (L) MID
OUTDOOR (H) HIGH
BW
INDOOR (L) OFF
INDOOR (H) OFF
OUTDOOR (L) AUTO
OUTDOOR (H) AUTO
2. Move the cursor to LOAD, and then press the CAM
(SET) button.
This will cause the setup you selected for SCENE in
step 1 to be applied to the image.
INDOOR(L)
priority)
setting (sensitivity
priority)
setting (picture
quality priority)
setting (sensitivity
priority)
SENS UP SHUTTER
OFF OFF
×2 AUTO
OFF
OFF AUTO
×2 AUTO
AUTO
DNR WHITE BAL
LOW ATW1
HIGH ATW1
LOW ATW2
HIGH ATW2

Preset Position Settings

Position Number Selection (MAP)
You could use the MAP item on the pan/tilt setup menu
instead of the PRESET item to select a position number.
1. Move the cursor to PRESET POSITION O, and then
press the CAM (SET) button.
**PRESET POSITION**
1*
5
9
13
17
21
25
29
ID:DOOR
033-064
RET TOP
2. Move the cursor to the number you want to select,
and then press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu. (this page)
To select a position number in the range of 033 to
064, move the cursor to 33-64 in the lower left corner
of the menu, and then press the CAM (SET) button.
Preset numbers set subsequently are the same.
**PRESET POSITION**
33
37
41
45
49
53
57
61
ID:
065-096
RET TOP
Notes:
• An asterisk (*) to the right of a position number
indicates that it already has a preset position
assigned to it.
The home position number is indicated by the
letter H next to the asterisk.
• When the cursor is located at a position number
that has a position ID, the position ID text
appears next to ID: on the menu screen.
Position Setting (POSITION SET)
The position setting can be used to specify the camera
position (pan and tilt), the lens zoom setting, and the
focus setting.
1. Move the cursor to POSITION SET O and press the
CAM (SET) button to display the position setting menu.
POSITION SET
PRESET ID
RET TOP DEL
-25-
2 3 4
6 7 8
10 11 12
14 15 16
18 19 20
22 23 24
26 27 28
30 31 32
225-256
34 35 36
38 39 40
42 43 44
46 47 48
50 51 52
54 55 56
58 59 60
62 63 64
001-032
PRESET NO. 1*
ON