General Specifications - Klein Tools ET60 Manuel D'utilisation

ENGLISH
Klein Tools ET60 is a solid-state, low impedance, electronic voltage
tester. It measures AC/DC voltages up to 600V. The ET60 does not
require batteries; it is powered by the applied voltage.
• Operating Altitude: ≤ 6562 ft. (2000 m)
• Relative Humidity: <90% non-condensing
• Operating Temperature: 5°F to 113°F (-15°C to 45°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Battery Type: None (powered by applied voltage)
• Dimensions: 5.67" x 2.35" x 1.44" (144 x 59.8 x 36.5 mm)
• Weight: 3.2 oz (92 g) without test leads
• Calibration: Accurate for one year
• Standards: Conforms to: EN61326-1:2013,
• Pollution degree: 2
• Drop Protection: 9.8 ft. (3m)
• Ingress Protection: IP54 (except test lead jacks, see WARNINGS)
• Safety Rating: CAT IV 600V, Class2, Double insulation
CAT IV: Measurement category IV is applicable to test and
measuring circuits connected at the source of the building's
low-voltage MAINS installation.
• Electromagnetic Environment: IEC EN61326-1:2013. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
2

GENERAL SPECIFICATIONS

EN61326-2-2:2006, EN61010-1:2010,
EN61010-2-030:2010, EN61010-031/A1:2008