Advanced Programming; Setting The Language; Dosage Calendar Programming - aqua Simpool Manuel D'instructions Et D'entretien

Simpool Timer Model
Programmable digital peristaltic pump
Dosage length and time can be modified only if the modification entry On Line in the Settings Menu
has been enabled.

3.3 ADVANCED PROGRAMMING

Here below are the various features of the Programming Menu in greater detail.
Every parameter that is changed in the pump programming is saved when you go back to the initial
display. If the pump power supply is disconnected before going to the stand-by display, programmed
data is lost.

3.3.1 Setting the Language

From the LAn entry you can choose between Italian It and English En via the ▲ ▼ keys. Use Enter to enter and
exit. (Fig. 8)

3.3.2 Dosage Calendar Programming

From the do.C entry it is possible to access the following submenu: (Fig. 9)
▪ Sun/Mon/Tue/Wed/Thu/Fri/Sat/ALL: it allows you to select the days of the week using the ▲ and ▼ keys
and if necessary it allows you to set a daily programming using the "ALL" entry;
▪ H.d.1-d.8: it allows you to display or set the corresponding dosage starting time d.1- d.8 using the ▲ and
▼ keys (range 0-23 h);
ADSP7000722
Fig. 7 - Standard programming from User Menu
Fig. 8 - Setting the Language
rev. 1.0
INSTRUCTION AND MAINTENANCE MANUAL
23/02/2017
ENGLISH
44/64