Adjusting The Chronograph Hands To Zero Position - Festina JAGUAR IJM5030D Mode D'emploi

Adjusting the chronograph hands to zero position

Minute
Center stop-second
counter
Example:
1
One or several chronograph hand are not in
their correct zero positions and have to be
adjusted (e.g. following a battery change).
1
Hour counter
2
Push-
button A
2
Push-
button B
Pull out the crown to position III (all 3
chronograph hands are in their correct or
incorrect zero position).
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds (the
centre stop-second rotates by 360º
corrective mode is activated)
18
Adjusting the centre stop second:
Single step 1 x short
Continuous long
Adjusting the next hand
Adjusting the hour counter hand
(position 6h)
Single step 1 x short
Continuous long
Adjusting the next hand
Adjusting the minute counter hand
(position 9h)
Single step 1 x short
Continuous long
3
Returning the crown to position I
3
Termination of the chronograph hands
adjustment (can be carried out at any
time)
19