Setting The Date (By Quick Operation) - Festina IFM6P89 Manuel D'instruction

I
ENGLISH INSTRUCTION MANUAL
D) SETTING THE MONTH (BY QUICK OPERATION)
Each time the month-adjustment button is pushed, the month advances one month at a time. Be sure to press firmly on the
button when making month changes.
* Do not set the month when the date hand is between the 26th and 31st. Move the date hand out of this period. After this
operation, return the date hand to the proper setting. (When the date hand is between the 26th and 31st, month quick setting
can not be made or if a quick setting is attempted, the month may not advance to the next month as normal.)
* The month and date are synchronized such that when adjusting the date at the end of short months (less than 31days), the
month automatically adjusts to the correct month. The month disc changes around midnight of the 31st..
E) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set the date quickly.
Do not set the date between the hours 9:00p.m. and 0:30a.m.. The date may not change correctly the next day.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
IFM6P89