On/Off Button; Pulse Button - Linea 2000 Domo DO486BL Mode D'emploi

Masquer les pouces Voir aussi pour Domo DO486BL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
www.domo-elektro.be

ON/OFF BUTTON

This button is the on/off button for the various programmes
To start a certain programme, select the programme you want by turning the
control knob to the programme you prefer. Press the on/off button afterwards.
The indication light surrounding the PULSE - ON/OFF button will now light up
blue.
Press the ON/OFF button once to stop the programme at any time.

PULSE BUTTON

This is the button to manually operate the pulse function. This button may be used
to blend at full power for a short duration.
To use the pulse function, the blender needs to be in stand by mode and the
speed setting control needs to be in OFF. Each time you press the pulse button,
the blender will blend at full power. The indication light surrounding the control
button will light up blue. When the pulse button is let go, the blender will
immediately return to stand by mode.
SPEED SETTING CONTROL
This blender has 10 continuous speed settings.
After the blender is in its stand by mode, turn the control knob clockwise.
The blender will start working at the selected speed. The more you turn
clockwise, the higher the speed will be.
When using the device, the indication light surrounding the PULSE - ON/OFF
button will light up blue.
The device will automatically shut off after 10 minutes. When this occurs, you
need to set the speed setting control back in its OFF position before you can start
over.
PROGRAMMES
Soup
This programme will allow you to mix cold ingredients and simultaneously heat them
up to create a soup. The friction of the blades heats up the ingredients. The fluid gets
heated up to about 40°C.
How the programme runs:
The blender switches to speed setting 7 for 7 seconds.
After 3 seconds the speed hits the maximum speed setting.
This speed is maintained until the end of the programme.
Length of the programme: 8 min.
Attention: When using this function, its possible that the jar slightly
changes colour.
41
DO486BL

Publicité

Table des Matières
loading

Table des Matières