Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DO486BL
3
2
1
USE
1. Put the plug into the socket and place the jar onto the device.
2. Put the ingredients into the jar.
Attention: The amount of ingredients may not exceed the maximum level
indication on the jar!
3. Make sure the jar is secury placed onto the jar.
4. Place the measuring cup into the lid by matching the two small tabs on the
measuring cup with the two notches in the lid's fill opening. Lock the measuring
cup in its place by turning it clockwise.
Attention: always make sure the measuring cup is locked in its place before
blending warm fluids.
Attention: never use the blender without the lid on the jar.
5. Select the speed, programme or use the pulse function by using the instructions
below.
6. Turn off the device after using it, turn the control knob in its OFF position and
carefully pull the plug from the socket.
STAND BY AND POWER SAVE MODE
•
Put the plug into the socket and place the jar onto the device. The power
indication light will turn on and the indication light around the PULSE - ON/OFF
button will light up red. The device is now in stand by mode.
•
When the device hasn't been used for 3 minutes, only the power indication light
will remain lit up. This is the power save mode. Push the ON/OFF button to take
the device out of the power save mode.
4
40
8
5
6
7
Publicité
Table des Matières
