Kalorik CYM 42228 Mode D'emploi page 5

Fax +1 305 430 9692
4. Before the first use, clean all the removable parts in warm soapy
water. Dry thoroughly. Caution: Do not submerge the base (1) or
the heating part (2) in water or any other liquid!
MAKING S'MORES
1. Place the appliance on a flat, horizontal, level and heat resistant
surface.
2. Fill the compartments of the food tray with graham crackers,
biscuits, marshmallows, chocolate or any other accompaniments.
3. Plug the appliance into a wall outlet.
4. Turn the dial on the front of the appliance to the "S'mores"
setting (200W). The power indicator should light up. We
recommend preheating the appliance for at least 5 to 10 minutes
for best results.
Note: After a short while, the quartz heating element inside the
enclosure (2) will glow red hot.
5. Prepare cracker sandwiches with a chocolate bar between 2
crackers / biscuits.
6. Pick a marshmallow using one of the 4 forks provided, a fondue
fork, or a long wooden stick for example.
7. Holding the fork by the handle, place the marshmallow above
the heater, taking care to not touch the stainless steel cover (4).
8. Rotate frequently until the marshmallow gets golden brown and
starts to melt.
9. When the marshmallow gets golden brown and starts to swell,
place it on the chocolate bar and place a cracker on top. The
"sandwich" created is a perfect s'more. Enjoy!
10. Once you are finished using the s'mores maker, turn the control
dial to "OFF" and unplug the appliance from the wall outlet.
WARNINGS!
1. Do not overcook the marshmallow, as it may melt completely
and fall on the stainless steel cover, causing smoke or fire, and
stain marks.
2. In case food or an object falls on the cover, always switch off
and unplug the unit. Then wait until it cools (at least 20 minutes)
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
5
Assembly page 5/28
CYM 42228 - 120501