Snooper SYRIUS LITE S1000 Mode D'emploi page 9

To change a setting press it with your finger and a list of the options available will be
shown next to a tick box. Simply press the tick box to indicate which option you would
like to choose.
Press 'OK' at the bottom of the screen. Your chosen settings will now be saved and will
appear on the screen each time you use your Syrius. If you want to switch between
your Current Speed and the Atomic Clock or the Estimated Time of Arrival and the Time
to Destination during your journey simply touch the LCD screen where either piece of
information is displayed and the unit will display the alternative setting and vice versa.
However, each time you switch on the device the original setting will be displayed.
Brightness and Volume Control - Both the volume and screen brightness can be
adjusted within the 'Configure' Menu. To set either function touch the screen in the centre
with your finger and then press the 'Configure' button. The screen will then display a
number of different icons.
Brightness Control - Press the icon. Syrius
enables you to adjust the brightness of the display
and save two brightness settings: one for driving
during the day and one for driving at night.
To set the daytime brightness select 'DAY' by
checking the tick box with your finger and then
using the '+' and '-' buttons to adjust the setting. To
set the 'NIGHT' setting, simply check the tick box
with your finger for 'NIGHT' and follow the same procedure. Once you have selected the
desired brightness press the 'OK' button at the bottom of the screen.
9 • UK