Snooper SYRIUS LITE S1000 Mode D'emploi page 14

Create a Multi-route
Press 'Create multi-route' to begin. A screen is
●
displayed where you can edit the name of the
multi-route, change the start point and add
your destinations.
Press 'Edit Name' to create a name for your new
●
multi-route. Once you have created a name
press the 'Save' button in the top right hand
corner. (In the example shown on the right, we
have called it 'Test 1')
If you wish to change the start position of the
●
multi-route, press 'Change Start' to change it.
If you are happy with the start position, you
can now begin to enter the data of your first
destination.
Press 'Add' – you are provided with several
●
options to find your destination. For this
example, select 'Find address by post code' .
Enter the postcode using the keypad that
●
is displayed. If you make a mistake when
entering the post code you can press the
'Arrow' key at the bottom of the keypad
to erase the data and then re-type the
information. When you have entered the
correct postcode press the 'OK' button on the keypad.
IMPORTANT: You must enter a space between the two sections of the postcode.
Syrius will then go back to the previous screen with the Country, Postcode
●
and Street fields completed. You can also view this destination by pressing 'Map' at the
bottom of the screen. Once you have entered the data press 'Set' .
14 • UK