Snooper SYRIUS LITE S1000 Mode D'emploi page 16

Estimated time of arrival at the end of multi-route journey. If, during the journey, you
●
wish to cancel the current stage and begin travelling to the next stage in your multi-
route journey press the summary screen and the message 'Delete current stage?' will
be displayed. Press 'OK' and the unit will calculate your route to the next stage in the
multi-route from your current position.
Note: If Syrius is turned 'OFF' and then 'ON' during the multi-route journey the device will
retain the current route and ask you if you wish to continue with the current destination
or with the next stage of the destination or to cancel the multi-route.
8. System Security Code
Syrius incorporates pin code security protection so that only users with access to the
pin code can use and operate the device. To activate the security code access the Menu
by touching the centre of the screen, press the 'Configure' button. Next tap the 'System
Security Code' icon and then select 'Yes' to switch the function on. Press the 'Enter Code'
button and enter the 4 digit code that you would like to use to protect your Syrius and
press 'OK' . Once this setting has been activated you will need to enter this code each time
you power on your Syrius or you will not be able to operate the device.
NB. It is important that you do not lose or forget this code. If you forget this code you will
need to return your Syrius so that the unit can be reset.
Configuration Security Code
It is also possible to protect the configuration
settings using a security pin code. To activate the
security code press the centre of the display to
access the Menu by touching the centre of the
screen of Syrius and then press the 'Configure'
button and press the black arrow twice.. Next tap
the 'Configuration Security Code' icon and select
'Yes' to switch the function on. Press the 'Enter
Code' button and enter the 4 digit code that you
would like to use to protect the configuration settings and press 'OK' . Once this setting
has been activated you will need to enter this code each time you want to amend the
configuration settings on your Syrius.
16 • UK