The use of multiple plugs or gangs is prohibited because of the danger of fire that is
involved with this.
Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
13 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
13.1 Complete overview
13.2 Warning notices on device
ATTENTION
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the device.
The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
1. Pull handle and
air inlet
2. LCD display
3. Sensor touch
control panel
4. Basket release
button
5. Frying basket
handle
6. Main power cord
7. Air outlet and oil
smoke filter
8. Frying basket
9. Frying pot
31