Controllable Functions; Lubrication - LGB Ge 4/4 III Serie Mode D'emploi

SERVICE

Lubrication

The axle bearings should be lubricated occasionally with a small amount of Märklin-
Öl (7149).
Changing Light Bulbs (E130 023)
Headlights: Carefully lift the glass from the lantern. Pull the light bulb out of the
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
new light bulb.
Changing Traction Tires (E126 174)
• Remove the old traction tire with a small flat blade screwdriver:
• ift the old traction tire out of the groove in the driving wheel.
• Carefully push the new traction tire over the wheel and insert it into the groove of
the wheel.
• Check to make sure that the traction tire is properly seated.

Controllable Functions

Lighting 1
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Raising/lowering pantographs, sequence
Sound: Greeting announcement
Sound: station announcements, sequence for Chur - St. Moritz
Sound effect: Operating sounds
Raising/lowering pantographs, direction-dependent
Sound on/off
ABV, off
Sound effect: Short whistle blast
Sound effect: Heating voltage relay
Sound effect: Blower
Sound effect: Compressor
Sound effect: Sanding
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together (buffer to buffer)
1 active in analog operation
2
with random sounds
3
is turned off by Function 7
10
3
1, 2
1
LV + LR
1 Sound 1
2 BS
Sound 3 +
3
SUSI 15
Sound
4
4 / 5
5 Sound 6
6 FS
Sound 7 +
7
SUSI F16
8
9
10 Sound 2
12 Sound 12
13 Sound13
14 Sound 14
15 Sound 15
16 Sound 17
17 Sound 18
18 Sound 19
21 Sound 21
22 Sound 22
23 Sound 23