Vga Modes - NEC MultiSync LCD 3735WXM Manuel D'utilisation

VGA modes:

Image page
·
Brightness
·
Contrast
·
H-Size
·
Phase
·
H-Position
·
V-Position
Setup Page
·
Auto Adjust
·
Back Light
·
Sharpness
·
Noise Reduce
·
Recall Default
OSM Page, Audio Page, PIP Page
These functions are the same as they are in video mode.
Color Page
This function is the same as it is in DVI mode.
Adjusts the overall image and background screen brightness.
Adjusts the image brightness in relation to the background.
Adjusts the horizontal and vertical position of the picture.
If the "Auto Adjust" function does not give you a satisfactory picture setting,
further tuning can be performed manually using the "H-Size" function.
Manually adjust the phase if the "Auto Adjust" function does not give you a
satisfactory picture setting.
Manually adjust the picture's horizontal position if the "Auto Adjust" function does
not give you a satisfactory picture setting.
Manually adjust the picture's vertical position if the "Auto Adjust" function does not
give you a satisfactory picture setting.
Automatically adjusts the Image Position setting, H-Size settings and fine settings.
(Depending on the type of signal used, Auto Adjust may not fully optimize the
display. Adjust the settings manually to achieve desired level of performance.)
Use "LEFT" and "RIGHT" keys to adjust the backlight level
Adjust the image to get as distinct or as soft a picture as is preferred.
It could removes the noise in the picture by applying temporal and spatial noise
reduction filters to the video data. There are four level (OFF, Weak, Medium,
Strong).
Allows the user to reset the settings back to the factory settings.
LCD 3735WXM E-17